Contact Number:+86-371-55912969


E-mail: [email protected]

Crushing Equipment

Crushing Equipment more

Mobile Crushing Plant more

Beneficiation Equipment more

Grinding Equipment more

Screening & Washing more

Feeding & Conveying more

Spring Cone Crusher

Spring cone crusher Introduction

Spring cone crusher is a traditional crusher, cone crusher is the first model, since this type of stable, inexpensive, by many customers like it. Although later he appeared in many models of cone crusher, spring cone crusher but still has people of all ages. Spring cone crusher, also called cone rock breaking machine, most suitable for crushing medium hardness over a variety of gravel and rocks. Spring on the housing, intended to be used when the material into the crushing chamber, can not be crushed when the elastic spring effect is produced, so that the distance between the movable cone and the cone of silence becomes large, its role and roll on broken similar spring principle. This allows non-crushing materials such as iron and the like, directly discharged into the crushing chamber without causing damage to the crushing chamber. Spring cone crusher, is particularly suitable for two-stage crushing, high production efficiency, and the price is cheaper than the hydraulic cone break, processing efficiency double jaw crushing machine and roll break much higher.
Yield: 16-1941m³ / h
Applications: metallurgy, building materials, road building, chemical and silicate industry.
Description: This machine is divided into standard, intermediate and short-head type, in general, standard feeding large size, nesting size also coarse; intermediate suitable for medium crushing; short head type cone crusher steep, feed particle size is small, it is conducive to the production of fine grade material.

Spring cone crusher structure

Simple internal structure of spring cone crusher mainly consists of frame, transmission, air eccentric shaft, bowl-shaped bearing, crushing cone, adjusting device, adjusting sleeve, several parts of the spring and the adjustment of discharge port with hydraulic stations, operation and maintenance It is also very convenient.

Spring cone crusher works

Spring cone crusher, the motor gear driven by the eccentric rotation, moving cone rotating swinging eccentric bushings forced to do under the dynamic, moving cone section near the cone of silence becomes the crushing chamber, the material to be crushed from feed after entering the port, by the dynamic cone and the cone of silence multiple compression and impact, eventually forming materials meet the requirements of size, when the moving cone leave the zone, the material is shaped fall under its own gravity, is discharged from the conical bottom complete crushing.

Spring cone crusher Features

1, product size uniform: After the device is broken resulting material product size is very uniform, also a lot of cube content, reducing the flakiness of the material, the material to meet different customer requirements.
2, long life wearing parts: wearing parts are made of wear-resistant material manufacturing is the most top-end materials and the latest processing technology, wear parts used to make the device has a high wear resistance, reducing the fragmentation of friction equipment up and running more smoothly, extending the replacement cycle of wearing parts.
3, low noise, small vibration, less failure: not only can be a long job of crushing the material, but also very few times in the process of crushing equipment failure, noise and vibration is very low, even at night work It will not affect people's lives around.
4, energy saving, environmental protection: Compared with other equipment, Hongxing machine this energy-saving equipment in more than 20%, but also for customers to save costs a million.
5, good sealing performance: a good seal in two ways, so that dust can not enter the inside of the machine, to ensure the cleanliness of lubricating oil makes the machine run more smoothly.
 
 
Technical Parameter:
Model Feeding Size (mm) Range of Output Size(mm) Capacity (t/h) Motor Power (kw) Weight (t) Overall Dimensions (L×W×H)(mm)
PYB 600 ≤ 65 12-25 12-25 30 5 2800×1300×1700
PYD ≤ 35 3-15 5-23 5.5
PYB 900 ≤ 115 15-50 50-90 55 10.2 3050×1640×2350
PYZ ≤ 60 5-20 20-65 10.2
PYD ≤ 40 3-13 15-50 10.3
PYB 1200 ≤ 145 20-50 110-200 110 24.7 4152×2300×2980
PYZ ≤ 100 8-26 50-150 25
PYD ≤ 50 3-15 18-105 25.6
PYB 1750 ≤ 215 25-60 280-480 160 50.5 6020×2849×4192
PYZ ≤ 185 10-30 115-320 51
PYD ≤ 85 5-15 75-230 50.5
PYB 2200 ≤ 300 30-60 590-1000 260-280 84 7705×3432×5057

pre:Hydraulic Cone Crusher next:CS Series Cone Crusher